New MTN 0.0KB TOTAL Free Browsing Settings (HTTP Injector & KPNTunnel) | Techpaded Blog

New MTN 0.0KB TOTAL Free Browsing Settings (HTTP Injector & KPNTunnel)

What's going on TechpAddicts! Say bye bye to mPulse guys as Techpaded is back with another moment of free browsing, and today I'm here with the settings for MTN 0.0KB free browsing cheat for September on KPNTunnel and HTTP Injector.

Latest MTN 0.0k Free Browsing Cheat For HTTP Injector VPN 2018

This cheat has been released already, but I was thoroughly testing it over and over on different SIM cards to know if it's unlimited or not - so I apologize for the delay! Please note that this is different from the mPulse cheat, and you don't even need airtime or data to start browsing for free. Let's get started now!

Requirements

-> You need an MTN SIM card with zero airtime and data.
-> Strong 3G/4G network.
-> Download KPNTunnel apk or download HTTP Injector apk (depending on the VPN you like).

Please note that after I tried this tweak on multiple lines, I discovered that it is not unlimited. The first SIM stopped browsing after using 2GB worth of data, while others were capped at 1GB daily.

New MTN 0.0KB TOTAL Free Browsing Settings (HTTP Injector & KPNTunnel)

MTN 0.0KB Free Browsing Cheat Settings for KPNTunnel


Download updated KPN Rev Config file for this MTN 0.0kb cheat.
If you prefer using KPNTunnel for this cheat, you can download it from the link above. After that, also download the KPN Config File for this MTN cheat via the provided link, then follow the instructions below:
  • Open the KPN Tunnel Rev app and click on the Settings Icon (it is the third icon found at the top right corner of the app).
  • Tap Config options >> Import and locate the MTN config file you earlier downloaded, then tap on it to import.
  • Tap on the middle icon and tick the SSH Tunnel box.

That's all TechpAddicts! Go back to main page and hit the START button. Once it connects, you can now begin your free browsing and downloading with super-fast speed.

MTN 0.0KB Free Browsing Cheat Settings Using HTTP Injector

Firstly, use the link above to download HTTP Injector VPN app, and also the Config File for the MTN cheat using the given link. Now import it by following these steps:
  1. Launch the HTTP Injector app and tap on the Copy button which can be found at the top right corner.
  2. Next, click “Import Config” and locate the config file you previously downloaded, then tap on it to import.

Now you're through with the setup, simply tap on the START button to connect. Then your days of total free browsing has commenced.

Please don't hesitate to share this post with friends and comment down below how many gig you use daily! Keep enjoying and always tell your friends about the best free browsing blog - techpaded.com.ng.

RELATED POSTS:

19 Responses to "New MTN 0.0KB TOTAL Free Browsing Settings (HTTP Injector & KPNTunnel) "

  1. Blazing like fire 🙌🙌💪💪

    ReplyDelete
  2. This comment has been removed by a blog administrator.

    ReplyDelete
  3. Hi, Neat post. There's an issue with your website in internet explorer,
    might test this? IE still is the marketplace chief and a large component of other folks will
    omit your wonderful writing because of this problem.

    ReplyDelete
    Replies
    1. We'll look into that Sir. Sorry for the inconvenience 🙏

      Delete
  4. Replies
    1. Enjoy bro. Kindly share this post with friends.

      Delete
  5. This design is wicked! You most certainly know how to keep a
    reader entertained. Between your wit and your videos, I was almost moved to start my own blog (well,
    almost...HaHa!) Wonderful job. I really enjoyed what you had
    to say, and more than that, how you presented it. Too cool!

    ReplyDelete
    Replies
    1. Thank you! Do invite your friends here also.

      Delete
  6. After downloading. The apk is not opening

    ReplyDelete
  7. Please hope the config file for http injector does not expires

    ReplyDelete
  8. No bro! But we'll keep updating it.

    ReplyDelete
  9. mine is slow and not downloading​,I am using http injection

    ReplyDelete
    Replies
    1. Too much people are using HTTP Injecor, so they're dropping connections. But have you tried the updated KPNTunnel 2in1 Config? That works both for the 0.0KB and mPulse data. So if you've reached your 1gb limit on 0.0kb, simply switch to mpulse cheap data.

      Give us feedback!

      Delete
  10. I was unable to import the .ktr file for kpn tunnel. The import page didn't show the file. Pls help!!!

    Thank for the update anyway!

    ReplyDelete
    Replies
    1. Where did you download the Config file from?

      Delete

What do you have to say about this post? Kindly drop your comment here!

Are you finding it difficult to comment? Please read: 3 Easy Steps To Comment on Techpaded

Note: only a member of this blog may post a comment.